Leather honing wheel 250mm

Description

250 mm Leather honing wheel of very high quality.

In terms of size, the wheel is precision machined from a solid block and therefore is very close to our CBN wheels in size (250mm +/-0.3mm).

Has the rough surface of the leather outwards and is suitable for removing burr as well as for fine polishing metals and ceramics.

The leather needs to be impregnated with honing wheel oil and prepared with optional diamond paste before use.

Note:

The 16 mm bore size  is designed specifically for use on the WSD-250.

The wheel is therefore certified and part of our Genuine Product segment.

Special note for the 12 mm bore version:

Designed to be used with our adapter for 2 wheels – short version + thumb nut. The wheel can, however, also be mounted on the main side of your 12 mm machine (That is, where the grinding wheel usually is). To enable this, you need to supplement with one of our spacer for shaft/adapter.

We get better sharpness when a honing wheel has diameter close to the grinding wheel, as better matching the profile of the ground edge. Even if the grinding and honing angles are matched perfectly, a smaller honing wheel will not cover the full height of the bevels ground on the larger wheel – only parts of the bevel will be honed. This is not as obvious at higher edge angles like 15-20 dps, as at lower angles of 13-10 dps.